Skip to content

Independent auto repair, Welland, ON

Dealer-level diagnostics. Local shop.

Diagnostics, module programming, electrical and general repair at 230 Colborne St, Welland. Tony confirms the fault before any part goes on the vehicle.

Check engine, battery, ABS. We read these for a living.

Open Monday to Friday, 8:30am to 5:30pm

Why Berardocco Auto

4
Specialties
3
Towns served
3
Credentials
1
Technician you talk to
  • 310S Red Seal licensed
  • Ford and GM dealer trained
  • You approve every quote
  • Talk to the tech, not a front deskCall (905) 735-3515
  • Welland
  • Wainfleet
  • Port Colborne

Grand Opening Sale

$89.99Oil change, rotation & inspection

Make sure your vehicle is ready for those school runs.

  • Full or semi-synthetic oil change
  • Oil filter replacement
  • Tire rotation
  • Vehicle inspection
Call (905) 735-3515

*Some conditions apply. Call for details.

Start here

What is your vehicle doing?

Pick the closest match. You get the service that covers it and a one-tap way to book.

Choose the closest match to see which service covers it and book it in.

Not sure which one? Call (905) 735-3515 and describe it.

Services

What we do

Diagnostics, programming and electrical are the specialty. Brakes, suspension and maintenance are done here too.

  • Diagnostics

    Check-engine lights, no-starts and intermittent faults. Dealer-level scan tools, live data and factory wiring diagrams to find what is actually wrong.

    Read about Diagnostics
  • Module Programming

    ECU, BCM, TCM, ABS and key programming, replacement module coding and software updates, done in-house in Welland.

    Read about Module Programming
  • Electrical Repair

    Wiring and harness repair, parasitic draws, shorts, lighting, sensors, charging and battery faults, and cleanup of bad aftermarket wiring.

    Read about Electrical Repair
  • General Repair

    Brakes, suspension, steering, oil changes, tires, cooling, exhaust and safety inspections, done by the same technician who handles the electronics.

    Read about General Repair

Before and after

The kind of work we do

Drag each handle to compare. These are illustrative examples of the repairs the shop specializes in. Photos of Tony Berardocco's own jobs will replace them as they come through the bay.

  • Illustrative example: A corroded battery terminal beside a clean connector being seated into a factory harness, after
    Illustrative example: A corroded battery terminal beside a clean connector being seated into a factory harness, before
    Electrical repair: corroded terminals and bad connections cleaned up and reconnected properly. Drag or use the arrow keys to compare before and after.
  • Illustrative example: Corroded control module beside a new programmed unit, after
    Illustrative example: Corroded control module beside a new programmed unit, before
    Module work: failed unit replaced, programmed and coded in-house. Drag or use the arrow keys to compare before and after.
  • Illustrative example: Corroded brake rotor beside a newly installed rotor, after
    Illustrative example: Corroded brake rotor beside a newly installed rotor, before
    Brake service: seized, corroded hardware back to new. Drag or use the arrow keys to compare before and after.

Step by step

How a job runs

  1. Step 1

    Call the shop

    Call the shop with your name, your vehicle and what it is doing. You get a time that works.

  2. Step 2

    Diagnose and confirm the fault

    Tony reads the codes, tests the circuit and confirms the cause before writing anything up.

  3. Step 3

    Approve the quote

    Parts and labour, in writing, before a wrench moves.

  4. Step 4

    Repair and verify

    He re-scans it, road tests it, and tells you what was wrong and what he did about it.

The shop

Born and raised in Welland

Tony Berardocco is a 310S Red Seal technician with Ford and GM dealer training and years in independent shops. He opened Berardocco Auto at 230 Colborne St on August 31, 2026.

Tony was born and raised in Welland. He trained at Ford and GM dealerships, where the diagnostic and programming work happens, then spent years in independent shops seeing the other side: customers paying dealer prices for jobs a good independent could do, or getting parts replaced on a guess because the shop did not have the tools to find the fault.

  • 310S Red Seal Licensed
  • Ford Dealer Trained
  • GM Dealer Trained
More about Tony and the shop
Diagnostic scan tool on a workbench in a dark shop
Pickup truck engine bay under a work light

Where we work

Serving south Niagara

The shop is at 230 Colborne St in Welland and takes vehicles from across the towns listed here.

Directions and hours
  • Welland
  • Wainfleet
  • Port Colborne

FAQ

Common questions

Do I need an appointment?
Call the shop at (905) 735-3515, or send the booking form on the contact page. Berardocco Auto is open Monday to Friday, 8:30am to 5:30pm. Booking ahead means the right amount of time is set aside for your vehicle.
Where are you located, and which areas do you serve?
230 Colborne St, Welland, ON L3B 3P1. We serve Welland, Wainfleet, Port Colborne.
Do you only work on Ford and GM?
No. Ford and GM are where Tony's dealer training is, and the shop works on other makes as well. If you are not sure, call with your year, make and model and we will tell you straight.
Why go to an independent instead of the dealer?
Tony trained at Ford and GM dealerships and does the same diagnostic and programming work here. You talk to the technician who worked on your vehicle, and you pay independent shop rates.
How do quotes work?
Tony tells you what he found, then writes up the parts and the labour. You say yes or no.

Get it fixed

Talk to the shop

Call (905) 735-3515
Address
230 Colborne St, Welland, ON L3B 3P1
Hours
Hours
Monday to Friday: 8:30am to 5:30pm
Closed Saturday and Sunday
Call the shop or message us on Facebook to book your vehicle in.
Serving
Welland, Wainfleet, Port Colborne

Book your vehicle in

Best way to reach you

Name plus a phone number or an email is all we need.

Prefer to talk? Call (905) 735-3515.

Call (905) 735-3515